BUY IT NOW
WE ACCEPT BOTH
Automec
|
|
|
BUY IT NOW |
|
Automec |
|
|
CNC 150 Autogauge |
|
CNC 150 is an economical, simple to use control that incorporates the most popular features used in our 30-plus years of experience in the press brake backgauging business. CNC 150 will control any of the Automec backgauge configurations as either a 1-axis (backgauge), 2-Axis (Ram Control) or 3-axis (Programmable gauge bar height) |
| Features: * Incremental Corrections- dimensions can be corrected by adding or subtracting incrementally from the existing dimension. * Bend Allowance- All backgauge dimensions can be offset with one data entry up to +- .999” * Ram Depth Mode- Programmable in inches or millimeters from the flat metal calibration point. On most hydraulic press brakes, the top of stroke can be varied from bend to bend and a ram slow down point can be programmable for each job. * Ram Offset- all of the Ram depths can be offset with one data entry up to +-.999” * Backgauge Retract/Delay- backgauge can be programmed to retract away from the die a specified time and distance to allow the operator time to reposition the work piece. * Backgauge Retract on Pinch Point- On 2-Axis hydraulic brakes this features allows you to program the backgauge to retract once the work piece is pinched in order to clear reverse bends. Both time and distance of retract can be programmed separately for each bend. * Self Diagnostics- error codes appear for programming mistakes or system malfunction. |
|
|
Mechanical Specifications: |
| Model | CNC 150A | CNC150MB | CNC 150/B or CNC150/BP | CNC 9x9/HD or CNC150/HD/P | CNC150/TD | CNC150/G48/HD | CNC150/G48TD |
| Holding Force | 200 lbs. | 200 lbs. | 400 lbs. | 400 lbs. | 600 lbs. | 600 lbs. | 600 lbs. |
| Number of Drives | 1 | 1 | 2 | 2 | 3 | 2 | 3 |
| Weight | 200 lbs. | 200 lbs | 300 lbs. | 350 lbs. | 450 lbs. | 615 lbs. | 815 lbs. |
| Overall Height | 26" | 21" | 26" | 26" | 26" | 26" | 26" |
| Overall Depth | 45" | 41" | 45" | 45" | 45" | 45" | 45" |
| Overall Width | 16" | 31" | 40" | 77" | 148" | 114.5" | 212" |
| Gauge Bar Length | 3' | 5' 5" | 7' | 11' | 18' | 11' | 18' |
| Positioning Speed | 600 IPM | 600 IPM | 600 IPM | 600 IPM | 600 IPM | 600 IPM | 600 IPM |
| Gauge Travel | 24" | 20" | 24" | 24" | 24" | 48" | 48" |
| Repeatability | +- .002" | +- .002" | +- .002" | +- .002" | +- .002" | +- .002" | +- .002" |
| Vertical Height Adj. | 10" | 10" | 10" | 10" | 10" | 10" | 10" |
| Recommended Width | Up to 4' | 5' to 8' 6" | 5' to 8' 6" | 9' to 14' | over 14' | 9' to 14' | over 14' |
| Add R-Axis | N/A | N/A | YES | YES | YES | YES | YES |
| Additional Options: |
| DP-4 Pendant Mount Assembly |
| *Extra Length Linear Scale (24” travel) for Cat 1 Ram Axis (add) |
| Extra Pair GF-1, GF-8 or GF-9 Finger Assembly |
| G48 Rollaway Option (available only on G48 system) |
| G48 Tilt-Down Feature (available only on G48 systems) |
| Pinch Point Switch Assembly |
| Factory Installation |
| Note: Specify if backgauge will be mounted in dovetail slot of pressbrake. |
| Note: GF-9 Fingers will be provided on low profile P models and GF-8 fingers will be provided on all other models unless otherwise specified. |
| Note: Standard ram scale is 12”. If ram travel exceeds 12”, the extra length 24” linear scale must be ordered. |
| Add Ram Axis: Category 1 - Accurpress, Allsteel, Cinn, D&K, Diacro, HTC, Hydrapower, Niagara, Pacific, Piranha, Standard, Tri-Acro, Wysong MTH, Wyson Rotary Category 2 - Adira up-acting, Amada, Guifil, Komatsu, Promecam Category 3 - Adira down-acting, AFM, Atlantic, Betenbender, Clausing, GFM, Heller, LVD, Wolf. |
