BUY IT NOW
WE ACCEPT BOTH
Automec
|
|
|
BUY IT NOW |
|
Automec |
|
|
CNC 300 Autogauge |
|
The CNC 300 is a control for Automec Backgauges that can be programmed as simple as our popular CNC 150 or it can be programmed to utilize an array of sophisticated funtions. These include a tool library, RS 232 interface with software, automatic ram referencing, ram angle mode, backgauge reversal on pinch pint, and a parts counter. |
| Features: * Multi-Level Sophistication: An 11-digit alpha-numeric parts description can be input at the off-line computer and a set-up sheet with tool parameters and bending information can be quickly printed for systematic duplication of set-ups. With the CNC 300, the user decides what level of sophistication he wants out of the control and when he wants to implement it. All systems are built the same but if the operator chooses not to enter such information as tooling parameters, the system can be calibrated and operated in the traditional depth mode without entering the tooling information. * Teach Mode: You simply bring the press brake ram to the correct bending angle for each step of the program and press one button to program that position. * Off-Line Programming: The CNC300 means a simple, low-cost, durable control on the shop floor with the ability to control job parameters from an off-line computer to reduce set-up time. The jobs can be set-up on the shop floor and uploaded to the computer for future runs or can be programmed in the office and downloaded to the CNC300 at the press brake. In either case the operator can easily make changes on CNC300 to correct for minor variations without disturbing the jobs stored in the computer memory. * Angle Mode with Angle Correction: When programming in degrees the actual degrees can vary from the programmed angle due to material thickness variations or springback. Simply program your measured angle and CNC300 will adjust automatically to correct programmed angle. Standard Features: |
|
|
Mechanical Specifications: |
| Model | CNC300/A | CNC300/B or CNC300/BP | CNC300/HD or CNC300/HD/P | CNC300/TD | CNC300/G48/HD | CNC300/G48/TD |
| Holding Force | 200 lbs. | 400 lbs. | 400 lbs. | 600 lbs. | 600 lbs. | 600 lbs. |
| Number of Drives | 1 | 2 | 2 | 3 | 2 | 3 |
| Weight | 200 lbs. | 300 lbs | 350 lbs. | 450 lbs. | 615 lbs. | 814 lbs. |
| Overall Height | 26" | 26" | 26" | 26" | 26" | 26" |
| Overall Depth | 45" | 45" | 45" | 45" | 45" | 45" |
| Overall Width | 16" | 40" | 77" | 148" | 114.5" | 212" |
| Gauge Bar Length | 3' | 7' | 11' | 18' | 11' | 18' |
| Positioning Speed | 600 IPM | 600 IPM | 600 IPM | 600 IPM | 600 IPM | 600 IPM |
| Gauge Travel | 24" | 24" | 24" | 24" | 48" | 48" |
| Repeatability | +- .002" | +- .002" | +- .002" | +- .002" | +- .002" | +- .002" |
| Vertical Height Adj. | 10" | 10" | 10" | 10" | 10" | 10" |
| Recommended Width | Up to 4' | 5' to 8' 6" | 9' to 14' | over 14' | 9' to 14' | over 14' |
| Add R-Axis | Available | Available | Available | Available | Available | Available |
| Additional Options: |
| DP-4 Pendant Mount Assembly |
| *Extra Length Linear Scale (24” travel) for Cat 1 Ram Axis (add) |
| Extra Pair GF-1, GF-8 or GF-9 Finger Assembly |
| G48 Rollaway Option (available only on G48 system) |
| G48 Tilt-Down Feature (available only on G48 systems) |
| Pinch Point Switch Assembly |
| Factory Installation |
| Note: Specify if backgauge will be mounted in dovetail slot of pressbrake. |
| Note: GF-9 Fingers will be provided on low profile P models and GF-8 fingers will be provided on all other models unless otherwise specified. |
| Note: Standard ram scale is 12”. If ram travel exceeds 12”, the extra length 24” linear scale must be ordered. |
| Add Ram Axis: Category 1 - Accurpress, Allsteel, Cinn, D&K, Diacro, HTC, Hydrapower, Niagara, Pacific, Piranha, Standard, Tri-Acro, Wysong MTH, Wyson Rotary Category 2 - Adira up-acting, Amada, Guifil, Komatsu, Promecam Category 3 - Adira down-acting, AFM, Atlantic, Betenbender, GFM, LVD |
